StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Thermal Conductivity Report - Essay Example

Cite this document
Summary
Conduction is defined as the transfer of energy from more energetic particles to adjacent less energetic particles as a result of interactions between the particles. Conduction can take place in solids, liquids, or gases. In solids, conduction is the combined result of molecular…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91.7% of users find it useful
Thermal Conductivity Report
Read Text Preview

Extract of sample "Thermal Conductivity Report"

Download file to see previous pages

The negative sign indicates that heat is transferred in the direction of decreasing temperature. The heat flow will be in the perpendicular-to-the-cross-section direction, i.e. one-dimensional. To determine how much heat is provided, we will calculate how much heat is taken (absorb) by the cold water at steady state condition. (it is the condition at which heat supplied is equal to the heat removed). For this we use the relation Where Q is the rate of heat transfer, s is specific heat capacity of water , Tout is the temperature of water at outlet and Tin is the temperature of water at inlet.

Putting the value of Q in (ii), we get The apparatus consist of accessories for providing heat at one end of sample composite bar and for taking heat at the other end of the bar through water. The water inlet temperature and outlet temperature was measured through thermometers. To determine the volume of water the measuring flask was provided. To determine the temperature at different points along the bar thermocouples were provided. The whole apparatus was well insulated to ensure one dimensional heat flow.

The heater was switched on and as the circulation of water through the cavity. Readings at thermocouples 1,2,3 and 4 were taken when the steady state condition was achieved. The volume of water circulating was measured and time taken for this. The inlet and outlet temperature of water is also measured. Heat transfer has taken place because of the difference of temperature between two ends of sample bar (consisting of copper and stainless steel). From graph slopes of copper and stainless steel shows that drop in temperature per unit length in copper bar is less as compared to stainless steel, which indicates that copper has let more heat to be transferred through it.

Similar result is given by the calculated thermal conductivities showing that copper thermal conductivity is greater as compare to stainless steel. A

...Download file to see next pages Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Thermal Conductivity Report Essay Example | Topics and Well Written Essays - 1000 words”, n.d.)
Thermal Conductivity Report Essay Example | Topics and Well Written Essays - 1000 words. Retrieved from https://studentshare.org/miscellaneous/1571785-thermal-conductivity-report
(Thermal Conductivity Report Essay Example | Topics and Well Written Essays - 1000 Words)
Thermal Conductivity Report Essay Example | Topics and Well Written Essays - 1000 Words. https://studentshare.org/miscellaneous/1571785-thermal-conductivity-report.
“Thermal Conductivity Report Essay Example | Topics and Well Written Essays - 1000 Words”, n.d. https://studentshare.org/miscellaneous/1571785-thermal-conductivity-report.
  • Cited: 0 times

CHECK THESE SAMPLES OF Thermal Conductivity Report

Gasification as Thermal Conversion Technology

This paper ''Gasification as thermal Conversion Technology'' tells that Gasification, which is also referred to as thermal conversion technology, uses heat in a low oxygen environment to turn waste solid in form into gas.... The gas is then used to produce electricity or harnessed into a variety of renewable energy sources....
5 Pages (1250 words) Report

Robust Control of Crane Crab

The purpose of this discussion "Robust Control of Crane Crab" is to provide the reader with a more informed understanding of the main problem of the crane drive control that is to keep almost zero burden deviation in the final crane crab or bridge position.... hellip; The main variable parameters are the burden weight mG (detected by a tensometer) and hanging rope length l (measured by an incremental sensor)....
17 Pages (4250 words) Report

Comparative Assessment of Control Mechanisms and Waste Management Technologies

This report "Comparative Assessment of Control Mechanisms and Waste Management Technologies" discusses a thermal Oxidation system that has a chamber that provides the right time to commence the combustion process.... They include biofiltration, chemical scrubbing, thermal oxidation, and chemical stabilization among others.... In addition, it will also look into the comparison between thermal oxidation and chemical stabilization mechanisms as methods of waste management and pollution control....
9 Pages (2250 words) Report

Thermal Desorption Treatment of Dioxin-Contaminated Soil

"thermal Desorption Treatment of Dioxin-Contaminated Soil" paper represents one of the largest dioxin remediation projects ever undertaken across the globe by embracing thermal treatment technology.... Directly Heated thermal Desorption was used at the Allied Feeds site as one of the key technologies used to treat contaminated soil.... However, with time, the proportion of spent lime in the excavated section shifted to eh south, and as a result, there were variations in feed moisture content, grain size distribution, and contaminant type over the course of the entire project and this impacted efficiency of thermal treatment operations....
5 Pages (1250 words) Report

Materials and Manufacturing: Automotive Piston

The specific feature includes high Thermal Conductivity, low density, compatibility with most techniques of fabrication, high reliability as well as excellent recycling features.... Automotive pistons in internal combustion engines are used in the conversion of thermal energy into mechanical energy.... Automotive pistons in internal combustion engines are used in the conversion of thermal energy into mechanical energy.... The outcomes of the final heat treatment, as well as the conditions of processing, include a desirable microstructure, which offers the required thermal and mechanical performance....
6 Pages (1500 words) Report

Material Selection for Eco School and Sports Centre

In the Eco School and sports centre, the roof is recommended to have a thermal resistance of 0.... W/m2K while wall thermal resistance will be 0.... The floor will have a thermal resistance of 0.... This report "Material Selection for Eco School and Sports Centre" sheds some light on the ICF tech that provides a technology called FormCloser designed to seal the core around the window and door openings prior to the concrete being pumped in....
8 Pages (2000 words) Report

Machine Tooling and Environmental Impact and Issues of Sustainability

In determining the applicability of a tool cutter, the criteria of performance are based on two factors: these are the toughness of the material and its thermal hardness.... thermal hardness refers to its ability to resist heat.... This report "Machine Tooling" analyzes the various factors that should be considered in selecting the materials along with providing information on the different types of materials for machine tools....
8 Pages (2000 words) Report

Joining of Engineering Ceramics

The application of the method depends on the improved mechanical and thermal features such as strength, creep, oxidation, and resistance to fatigue.... This report "Joining of Engineering Ceramics" presents different methods used in joining the ceramics to the metals.... The state-of-the-art methods are refractory metallization and active brazing of the metal from various perspectives: applications and processing....
12 Pages (3000 words) Report
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us